Need help?Do you have a question about the Marantz PM-62 and is the answer not in the manual?
General| Total Harmonic Distortion (THD) | 0.03% |
|---|---|
| Damping factor | 100 |
| Input Sensitivity | 2.5mV (MM), 150mV (line) |
| Speaker load impedance | 4Ω - 16Ω |
| Power Output | 60 W/ch (8 ohms) |
Covers warnings against moisture, cover removal, internal objects, and general safety precautions for operation.
Details on mains voltage settings, fuse replacement in plugs, and correct plug connection procedures.
Information about the user guide's figures and callouts, and copyright laws regarding recording.
Details on connecting various audio sources like tuners, CD players, turntables, tape decks, and speakers.
Information on grounding terminals, switched AC outlets, and power cord connections.
Explanation of front panel switches, controls, indicators, and their functions.
Description of terminals for connecting and controlling other audio equipment via a special-purpose cable.
Step-by-step instructions for playing analog records, FM/AM broadcasts, CDs, and AUX components.
Guidance on tape playback, recording, monitoring, and dubbing of prerecorded tapes.
Instructions on how to operate the remote control unit, its range, and proper aiming.
Procedure for installing and replacing batteries in the remote control unit.
Guidelines on how to clean the equipment's exterior safely without damaging the finish.
Instructions for replacing a blown fuse, emphasizing the correct type and rating.
Information on authorized service technicians and how to obtain repairs.
Guides users through common problems like no operation, sound issues, and remote control failures.
Details on power output ratings (FTC, DIN, IHF) and dynamic power capabilities.
Specifications for various input types, including magnetic and moving coil cartridges, and tuner/CD/aux/tape.
Information on power requirements, unit dimensions, and weight.
To Next Page