Marantz PM7005 User Manual

Setting the Auto Standby mode
You can set the unit to automatically switch to standby mode if the unit is
not operated for 30 minutes when there is no audio input (Auto Standby
mode).
Auto Standby mode is set to off by default.
.
SOURCE DIRECT
Power indicator
Turning Auto Standby mode off
1
Press and hold SOURCE DIRECT for more than 5
seconds to turn the Auto Standby mode off.
The power indicator flashes once.
Turning Auto Standby mode on
1
Press and hold SOURCE DIRECT for more than 5
seconds to turn the Auto Standby mode on.
The power indicator flashes three times.
Contents Connections Playback Settings Tips Appendix
Settings
38
Front panel Rear panel
Remote control
unit
Index

Marantz PM7005 Specifications

General

Damping factor	100
Amplifier class	-
Frequency range	5 - 100000 Hz
Input sensitivity	200 mV
Audio output channels	2.0 channels
Peak power per channel	40 W
Signal-to-Noise Ratio (SNR)	104 dB
Total Harmonic Distortion (THD)	0.02 %
AC (power) in	Yes
Audio (L/R) in	5
USB 2.0 ports quantity	1
Speakers connectivity type	Clamp terminals
Purpose	Home
Product color	Gold, Silver
Volume control	Rotary
Cables included	AC
Connectivity technology	Wired
Power consumption (standby)	0.2 W
Power consumption (typical)	170 W

Weight and Dimensions

Depth	379 mm
Width	440 mm
Height	125 mm
Weight	10000 g