43
General Procedure in the edit mode
1.
In the Preset Action Menu, press the PITCH + or PITCH – button to
select “Edit” then press the 3/8/ENTER button.
• Action Menu list appears on the display.
2.
Press the PITCH + or PITCH – button to select the menu item. Then
press the 4 or ¢ button to select the input choices.
3.
When changing the preset is completed, press the (F1: EXIT)
button.
• “Store?” appears on the display.
4.
Select “Yes” and press the 3/8/ENTER button to store the changes
or select “No” and press the 3/8/ENTER button to exit Menu Mode
without storing any changes.
1) Input
Use this menu to select the audio input for recording.
Set Value Description
INT MIC Internal stereo microphones
MIC/LINE External microphone(s) (MIC/LINE Jack)
LINE2 Line Level Input (LINE 2 Jack)
D.IN Digital Input
2) Rec Format
The “Rec Format” allows you to select the record audio format MP3
compression or high-fidelity PCM, the bitrate of the MP3 (320, 256,
192, 128 or 64 kbps) and the quantization of the PCM (16-bits or 24-
bits).
Set Value Description
MP3-320 / MP3-256 /
MP3-192 / MP3-128 /
MP3-64
(MP3)
Mono : 160, 128, 96, 64, 32kbps
Stereo: 320, 256, 192, 128, 64kbps
PCM-16 / PCM-24
(PCM)
Quantization: 16bits, 24bits
3) Rec Channel
The “Rec channel” allows you to select the record channel(s) from
stereo 2-channel or monaural 1-channel or stereo 2-channel with
dual mono.
Set Value Description
Stereo Stereo 2-channel audio file
Mono Monaural audio file
D.Mono
Stereo 2-channel audio file. The left channel
input is recorded in both channels.
To Next Page
Loading...
Need help?
General
