SR8001 RS-232C Control Specification Page: 15 / 22
Document Version [1.02]
Company Restricted
Command Reply from Slave
VALUE “MSV=0xxx”
UP “MSV=1”
Multi Room A/B
Speaker
VOLUME
DOWN “MSV=2”
“MSV=xxx”
xxx = vol. Value as +90 ~-90
VARIABLE “MSS=1”
Multi Room A/B
Speaker
VOLUME SET
FIXED “MSS=2”
“MSS:1” (VARIABLE)
“MSS:2” (FIXED)
TOGGLE “MSM=0”
OFF “MSM=1”
Multi Room A/B
Speaker
AUDIO MUTE
ON “MSM=2”
“MSM=1”
“MSM=2”
5-2. Specific Commands
Command from Host Reply from Slave
Auto status feedback
(The product default is disabled
all auto status feedback.)
“AST:x” (x = ‘0’ ~ ’F’)
bit 3 : Layer 4 ( 1 = Enable, 0 = Disable)
bit 2 : Layer 3 ( 1 = Enable, 0 = Disable)
bit 1 : Layer 2 ( 1 = Enable, 0 = Disable)
bit 0 : Layer 1 ( 1 = Enable, 0 = Disable)
same as
command define
To Next Page
Loading...
Need help?
General
