AMPLITUDE MODULATION
AM or AMI or AM2
: DEPTH
:INC
Data type
:
Allowed suffices
:
Default suffix
:
:<src>
ON
OFF
UP
DN
RETN
XFER
Data type :
Allowed suffices :
Default
suffix
:
Examples:
AM? or AMI? or
AM2?
Example:
Set AM
Depth (short form)
Set AM Depth
Set AM
step size
Decimal Numeric Program Data
PCT
PCT
Select modulation source where <src> is any one of: INTF1,
INTF2, INTO, INTF4,
INTF5,
INTF6, EXT1DC, EXT1AC,
EXT1ALC, EXT2DC, EXT2AC or EXT2ALC
Turn AM ON (local)
Turn AM OFF (local)
Go UP one
step
Go DOWN one step
Return
to
original setting
Transfer current value to be the new setting
None
None
None
AM: DEPTH 30PCT; INTF4 ;ON
AMI : DEPTH 40PCT
?
EXTIDC ;
ON
Prepares
message containing information on
Amplitude Modulation setting in one of the following
formats:
:AM:DEPTH <nr2>;<src>;<status>;INC <nr2>
:AM1:DEPTH <nr2>;<src>;<status>;INC <nr2>
:AM2:DEPTH <nr2>;<src>;<status>;INC <nr2>
where:
<src> is a program mnemonic representing the
source of the modulation signal and <status>
is a program mnemonic indicating
whether
the
modulation is locally ON or OFF
: AMI : DEPTH 56 .
6
; INTF3 ;ON; INC 5.0
3-2-18
46882-074C
To Next Page
Loading...