SEQT:ED!T
(continued)
:SAVE
Data type
:
Allowed suffices
:
Default suffix
:
Examples:
SEQT?
Examples:
SEQT:MODE?
Example:
SEQT:PARAM?
Examples:
Copy
TEMP to USER1 or USER2
Character Program Data (either
USER1 or USER2)
None
None
SEQT :SEQ
"
12245B7
"
;
DUR
"
E—
"
SEQT: MODE STD CCIR;MOD TOTAL FM
SEQT :PARAM :EXTD
200MS;SHFT
0
.
5PCT
SEQT:
EDIT :TNUM
3
?
TRFQ 1342 . 7HZ ; SAVE USER1
Prepares message containing information on the signalling
sequence and
duration settings in the following format:
:SEQT:SEQ <toneseq>;DUR <durseq>
where: <toneseq> is string program data defining
the
tone
sequence and <durseq> is string program data defining
the duration sequence.
:SEQT:SEQ
"
12245B7
"
; DUR
"
E—
"
:SEQT:SEQ
"1234*#9'’
( DTMF ONLY)
Prepares message containing
information on the
signalling standard
and
the modulation channel
selected
in the following format:
:SEQT:MODE:STD <standard>;MOD <modchannel>
where:
<standard> is a program mnemonic defining
the
tone
standard and <modchannel> is
character program data defining the
modulation channel allocated to tone
signalling.
: SEQT:
MODE: STD ZVEI;MOD TOTAL FM
Prepares message
containing information on signalling
parameter settings in the following format:
:SEQT:PARAM:EXTD <nrl>;SHFT <nr2>;RPTT <rpt>;SDLY <nrl>
where:
<rpt> is string program data defining the tone number
used to represent the repeat tone.
: SEQT : PARAM : EXTD 200;SHFT -1.6;RPPT "E"; SDLY 300
: SEQT :PARAM: SDLY 30;TDUR 100;TGAP
75
(DTMF ONLY).
3-2-26
46882-074C
To Next Page
Loading...