13
Nº326S Preamplifier Phono Modules Installation Instructions & Release Notes
6. Rotate the volume knob or press the volume ± buttons to
scroll through all available characters.
7. When the desired character appears on the front panel display,
press the enter button to select this character. The cursor will
automatically advance to the next character space.
• Custom input names can consist of up to 7 characters,
including letters, numbers, punctuation marks, and blank
spaces.
8. Repeat steps 6 and 7 until all seven characters have been
entered. When the seventh character is selected, the SAVING
DATA message will appear on the front panel display as
shown at the left to indicate that the new input name is being
saved.
9. Press and release the setup button to close the setup menu.
• The front panel setup LED is not lit when the setup
menu is closed.
Note
The factory-default input name must be restored one
character at a time using the character list (unless factory-
default settings are restored).
Bal Controls the left-to-right channel balance of the phono input
0.0 to 6.0 (left or right) connector. In some cases, phono cartridges introduce slight level
differences between the left and right channels. Adjustable in
0.1dB increments between 0.0 and 6.0dB, the Bal parameter can
be used to compensate for these differences, ensuring optimal
stereo balance between channels.
Note
• The Bal parameter does not affect record output levels.
• The Bal parameter affects only the phono input connector.
It should not be confused with the Balance control,
which affects all inputs, adjusting the left-to-right channel
balance of the main output connectors.
SAVING DATA
To Next Page
Loading...
