Mark Levinson 5805 - Input Configuration Options

17
N
0
5805 / N
0
5802 INTEGRATED AMPLIFIER / OWNER’S MANUAL
SETUP
INPUT SETUP (5805)
INPUT SETUP (5802)
Setup Menu Input Setup Set Input X
Input
B1 [analog XLR] Name=XXX
Volume
S1 (analog RCA) Offset=XXX
Power
S2 (analog RCA) SSP=On/Off
Display
Phono (analog) PCM Filter=XXX
Advanced
C1 (digital coaxial) PLL Lock= Normal/Wide
T1 (digital optical) Upsample=On/Off
T2 (digital optical) DSD Filter= XXX
USB BT Name
BT (Bluetooth) BT Pairing= Enable/Forget
Ph Balance= +/- 3dB
Infra Filt = On/Off
Phono Type= MM/MC
Available for analog inputs
Available for USB input
Available for all inputs
Available for digital and
Bluetooth inputs only
Available for Bluetooth
input only
Available for phono input
only
Setup Menu Input Setup
Input
AES [Digital XLR]
Set Input X
Volume
C1 (digital coaxial) Name=XXX
Power
C2 (digital coaxial) Offset=XXX
Display
T2 (digital optical) PCM Filter=XXX
Advanced
T2 (digital optical)
PLL Lock= Normal/Wide
USB Upsample=On/Off
BT (Bluetooth) DSD Filter= XXX
BT Name
BT Pairing= Enable/Forget
Available for USB input
Available for Bluetooth
input only
Available for all inputs