97
METAL X PRINTER USER GUIDE
EXTRUSION FLOW CHECK
Warning:The nozzles and extruded material will become hot during this test. Be careful not to touch
the nozzle or extruded material with your bare hands. Use the included tweezers and brush pan to
handle the material.
The purpose of this test is to determine how well the extrusion system is performing. The test extrudes a known
quantity of material. Based on the behavior of the machine during the test, the printer will determine whether
Supplies
● Tweezers
● Brush pan from accessory kit
EXTRUSION FLOW CHECK FOR METAL CHANNEL
1. Select the menu icon from the dashboard.
2. Utilities
To Next Page
Loading...
