Button Changed Function Confirmation
Last Door Closed Auto Arm "ON" 1 Chirp, LED
and
Parking Lights Flash
Last Door Closed Auto Arm "OFF" (Default) 2 Chirps, LED
and
Parking Lights Flash
Last Door Closed Auto Arm "ON" with 3 Chirps, LED
and
Parking Lights Flash
Auto Door Locking Upon Auto Arming “ON”
14
OFF
ON
OFF
ON
Turn On the Ignition Key
Flip the Valet Switch On/Off 6 Times
The LED will be on solid. The horn/siren will
emit 6 short beeps. You are now in the “Remote
Feature Programming” mode.
ON
“Separate Channel Mode”
X6
Step 2
Step 3
Step 1
Step 4
Button Changed Function Confirmation
Chirps "ON" with Single Unlock Pulse ON (Default) 1 Chirp, LED and Parking Lights Flash
Chirps "OFF" with Single Unlock Pulse ON 2 Chirps, LED and Parking Lights Flash
Chirps "ON" with Dual Unlock Pulse ON 3 Chirps, LED and Parking Lights Flash
Chirps "OFF" with Dual Unlock Pulse ON 4 Chirps, LED and Parking Lights Flash
#2 - Last Door Closed Auto Arming/Auto Arming Door Locking
#3 - Ignition Controlled Door Locking
Button Changed Function Confirmation
Ignition ON, Door Locking "ON" (Default) 1 Chirp, LED
and
Parking Lights Flash
Ignition Off, Unlocking "ON"
Ignition ON, Door Locking "ON" 2 Chirp, LED
and
Parking Lights Flash
Ignition Off, Unlocking "OFF"
Door Locking & Unlocking Feature "OFF" 3 Chirps, LED
and
Parking Lights Flash
Step 6: Remote Feature Programming (Part 1)
“Dedicated Button Mode”
Make Sure the Security System is Disarmed
To change a function, press and hold corresponding button (see chart below) until desired confirmation occurs.
#1 - Chirp Status Indicator with Single Unlock Pulse
Button Changed Function Confirmation
Instant Door Ajar Warning 1 Chirp, LED
and
Parking Lights Flash
30 Second Delay Door Ajar Warning 2 Chirps, LED
and
Parking Lights Flash
#4 - Door Ajar
M5A-IM 9/10/04 9:27 AM Page 14
To Next Page
Loading...
