013.
CONNECTING VIA Bluetooth
®
(PAIRING)
001. TURN THE SOURCE KNOB TO .
002. PUSH AND HOLD THE SOURCE KNOB FOR 3 SECONDS.
003. THE INDICATOR STARTS TO BLINK.
004. ENABLE Bluetooth ON YOUR DEVICE (SMARTPHONE, TABLET, COMPUTER).
005. ON YOUR DEVICE, SELECT ACTON MULTI-ROOM FROM THE Bluetooth LIST
AND ACCEPT PAIRING.
006. THE INDICATOR ON THE SPEAKER TURNS TO STEADY LIT AND THE
UNITS ARE CONNECTED.
THE ACTON MULTI-ROOM STORES UP TO EIGHT Bluetooth DEVICES
AND TRIES TO CONNECT TO THE LAST CONNECTED DEVICE FIRST.
FOR EXAMPLE, IF THE SPEAKER HAS BEEN CONNECTED TO THE
DEVICES: A–B–C–D–E–F–G–H, DEVICE H IS GIVEN FIRST PRIORITY,
WHILE DEVICE A IS GIVEN LAST PRIORITY. EVERY TIME IS SELECTED, THE
SPEAKER WILL DO AN AUTO CONNECTION OF DEVICES WITHIN ITS RANGE.
NOTE: IF THE BLUETOOTH DEVICE IS MOVED TOO FAR FROM THE
ACTON MULTI-ROOM, THE CONNECTION DROPS. MOVE THE DEVICE
WITHIN APPROXIMATELY 10 METRES WITHOUT OBSTACLES TO THE
SPEAKER AND THE CONNECTION IS AUTOMATICALLY RESTORED.
ACTON
MULTI-ROOM
004. 006.005.
002. 003.
001.
3s
To Next Page
Loading...
