Marshall Amplification Acton Multi-Room - Troubleshooting

TROUBLESHOOTING
029.
THE ACTON MULTI-
ROOM DOES NOT
TURN ON.
The speaker is not connected
to AC mains.
Connect the power cord to
the Acton Multi-Room and a
working AC wall socket.
PROBLEM CAUSE ACTION
THE ACTON MULTI-
ROOM CANNOT BE
DISCOVERED IN
THE MARSHALL
MULTI-ROOM APP
The speaker is not connected
to the Wi-Fi network.
The speaker and the mobile
device are not connected to
the same Wi-Fi network.
The speaker is not turned on.
The speaker is in standby
mode.
Push the SOURCE knob.
Turn the SOURCE knob to
Wi-Fi and push and hold for 3
seconds to make the speaker
discoverable.
Connect to the same Wi-Fi
network.
Connect the power cord to
the Acton Multi-Room and a
working AC wall socket.
THE SPEAKER
CANNOT CONNECT
TO A Wi-Fi
NETWORK.
There is no Wi-Fi network
available.
Connect to the speaker via
Bluetooth or using a cable.
Speaker is receiving too little
Wi-Fi signal
.
Move speaker closer to the
Wi-Fi router.