ENGLISH
4
From clean to distorted overdrives, the DSL is
a versale all-valve amp packed with features
including an eects loop, power reducon
switch and digital reverb. Your amp has been
specically designed to sound great at a range
of volumes. Perfect for you to use at home, in
rehearsals and studios, or on stage.
MODEL: DSL20CR DSL20HR
Power
20W
(with power
reducon
opon to 10W)
10W (with
power
reducon
to 10W)
Valves
3 x ECC83 and
2 x EL34
3 x ECC83
and 2 x
EL34
Channels
2 (split) “ultra gain” and
“classic gain”
Equalisaon
Treble, middle, bass,
presence, resonance, tone
shi switch
Eects Digital reverb
Outputs
3 x ¼” jack speaker output
(16Ω / 8Ω),
1 x 3.5mm jack emulated line
out
Eects loops Yes, series, send/return
Speakers
1 x 12”
Celeson
Seventy 80
(80W, 16Ω)
N/A
Unit weight 16.3kg 9.7kg
Unit width 500mm 500mm
Unit height 420mm 250mm
Unit depth 250mm 240mm
SPECIFICATION
This equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instrucons,
may cause harmful interference to radio
communicaons.
However, there is no guarantee that interference
will not occur in a parcular installaon. If this
equipment does cause harmful interference
to radio or television recepon, which can be
determined by turning the equipment o and
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separaon between the
equipment and the receiver.
• Connect the equipment into an outlet on
a circuit dierent from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
CAUTION: Any changes or modicaons not
expressly approved by the party responsible for
compliance could void the users authority to
operate the equipment.
This device complies with CAN ICES-3(B)/NMB-
3(B)