ENGLISH
6
mid frequencies in your sound. Turning an-
clockwise reduces the middle frequencies,
‘scooping’ the sound – this is accentuated when
used in conjuncon with Tone Shi.
10. BASS
Controls the amount of lower frequency in your
sound. Turning clockwise will increase boom-
end making the sound fuller.
11. PRESENCE
Adjust the power amp EQ to add treble to your
sound. Turning clockwise brings out the top end
frequencies in your tone.
12. RESONANCE
Adjust the power amp EQ to add body to your
sound. Turning clockwise brings out the low end
frequencies in your tone.
Note: The EQ controls are linked. Altering
the seng of one control can change the way
that the other controls behave, so it is worth
experimenng to nd your sound.
13. REVERB
Controls the overall reverb level.
14. OUTPUT
Use this switch to reduce power level from 20W
down to 10W, or to place the amp into standby
mode.
15. POWER
This turns the amp on and o.
To Next Page
Loading...
Need help?
General
