Marshall Amplification DSL40CR - Front Panel Functions; Classic Gain Channel Controls; Ultra Gain Channel Controls; Equalisation Controls

ENGLISH
5
FRONT PANEL FUNCTIONS
1. INPUT
Connectyourguitarhereusinga¼”jack
instrument cable.
CLASSIC GAIN CHANNEL
2. GAIN
Controls the gain level for the classic gain
channel. Use this control to adjust the amount
ofinputgain/signalsentintothepreampstage.
Running a higher gain setting increases the level
of distortion in your sound.
3. MODE STATUS LED
This LED lights green to indicate that clean
mode is selected and red to indicate crunch
mode is selected.
4. VOLUME
Controls the volume level of the classic gain
channel.
5. CLEAN/CRUNCH
Press to select clean or crunch mode. The
classicgainchannel’stwomodestakeyour
sound from clean to overdriven tones.
ULTRA GAIN CHANNEL
6. GAIN
Controls the gain level for the ultra gain
channel. Use this control to adjust the amount
ofinputgain/signalsentintothepreampstage.
Running a higher gain setting increases the level
of distortion in your sound.
7. MODE STATUS LED
This LED lights green to indicate that OD1
mode is selected and red to indicate OD2 mode
is selected.
8. VOLUME
Controls the volume level of the ultra gain
channel.
9. OD1/OD2
Press to select OD1 or OD2 mode. The ultra
gainchannel’stwomodestakeyoursoundfrom
distorted to heavy gain tones.
EQUALISATION SECTION
10. TREBLE
Controlsthehigherfrequencycontentofyour
sound.Turningclockwisewillincreasethehighs
makingthesoundbrighter.
11. MIDDLE
Controlsthemiddlefrequenciesofyour
sound.Turningclockwiseincreasesthelevel
ofmidfrequenciesinyoursound.Turning
anti-clockwisereducesthemiddlefrequencies,
‘scooping’thesound–thisisaccentuatedwhen
used in conjunction with Tone Shift.
12. BASS
Controlstheamountoflowerfrequencyinyour
sound.Turningclockwisewillincreasebottom-
endmakingthesoundfuller.
13. TONE SHIFT
ToneshiftreconguresthepreampEQ,giving
you a distinctly different sound. When tone
shiftisengaged,highandlowfrequenciesare
accentuatedandmidfrequenciesarecut.
14. PRESENCE
AdjustthepowerampEQtoaddtrebletoyour
sound.Turningclockwisebringsoutthetopend
frequenciesinyourtone.
15. RESONANCE
AdjustthepowerampEQtoaddbodytoyour
sound.Turningclockwisebringsoutthelowend
frequenciesinyourtone.
Note:TheEQcontrolsarelinked.Alteringthe
setting of one control can change the way
that the other controls behave, so it is worth