Need help?Do you have a question about the Marshall Amplification VMV-402-SH and is the answer not in the manual?
General| Brand | Marshall Amplification |
|---|---|
| Model | VMV-402-SH |
| Category | Switch |
| Language | English |
Product ideal for presentations, control rooms, remote productions, seamless switching of four inputs.
Lists key features including inputs, outputs, display modes, remote operation, and firmware upgradeability.
Describes various use cases like 4x1 switching, format conversion, quad monitoring, and multi-viewer functionality.
Lists all items provided in the product package, including the device, accessories, and power components.
Provides detailed technical specifications covering electrical, mechanical, and environmental parameters of the device.
Describes front panel elements like LEDs, buttons for input selection, quad view, and audio output.
Explains the rear panel ports for power, video inputs/outputs, network connectivity, USB control, and tally signal.
Guides users through connecting video sources, displays, and power supply for the device installation.
Details the IR remote control buttons and their functions for operating the VMV-402-SH.
Guides users through downloading and installing the Marshall control application, including prerequisites and desktop icon creation.
Details the process of updating the VMV-402-SH firmware using the control application, including driver installation and connection setup via USB.
Recommends using USB connection and control application for initial setup before attempting Ethernet connection.
Explains that setting the system output video format and frame rate is the most important initial configuration step.
Guides users to the Outputs tab to select the desired output format and frame rate from a pulldown window.
Covers additional video settings like Vertical Flip, Mirror, Video Shift, Brightness, Saturation, and Contrast that affect the output frame.
Explains how to configure Quad Mode patterns, labels, and label positions using the Labels tab in the control application.
Details how to connect and access the VMV-402-SH using its default static IP address via Ethernet and the control application.
Provides steps to change the VMV-402-SH's IP address to a custom static IP by configuring IP Address, Subnet Mask, and Gateway.
Explains how to operate the VMV-402-SH in DHCP mode, where the IP address is assigned automatically by the network router.
Information on controlling the VMV-402-SH remotely via Ethernet, USB, or IR optical, with a link to control codes and tips.
To Next Page