Marshall Amplification VMV-402-SH - VMV-402-SH Ethernet: Default IP Connection; Connect using VMV-402-SH Default Static IP

13
9.8 Using an Ethernet Connection with the Default Address
The VMV-402-SH maybe be setup with a Static (fi xed) IP address or an automatically assigned IP
address using DHCP mode. To use the control app in DHCP mode it should be connected to the unit
using USB or Static Ethernet connection fi rst. In this way, the app “learns” the specifi c MAC address
of the unit and will be able to fi nd it on a network.
The unit ships in Static address mode with IP address 192.168.1.110.
If no other device on the network has this address, it may be connected directly and accessed by the
control application.
From the Utilities tab, select Port Setting then select TCP/IP and confi rm that the
default address: 192.168.1.110 is displayed.
Click the Connect button and the Main page should appear shortly.