The following tables give the maximum recommended gap (between WSX sides) for
the relevant frequency range.
WSXs standing upright
Gap Smooth coverage range
0.5m 38 - 160Hz
1.0m 38 - 110Hz
2.0m 38 - 80Hz
WSXs lying horizontally
Gap Smooth coverage range
0.0m 38 - 160Hz
0.5m 38 - 115Hz
1.0m 38 - 86Hz
2.0m 38 - 60Hz
To avoid combing...
♦ Keep horizontal gaps below 1m for upright WSXs
♦ Keeps horizontal gaps below 0.2m for horizontal WSXs
4.7.4Horizontal splays
Splaying WSX arrays horizontally will widen their mid-bass coverage.
The following sketch shows an 8 wide x 3 high WSX array arranged in four
symmetrical pairs for smooth mid-bass coverage.
All material © 2007. Martin Audio Ltd. Subject to change without notice.
To Next Page
Loading...
