Martin Audio WAVEFRONT COMPACT - APPLICATIONS GUIDE User Manual

5.5.17 Saving a design
5.5.18 Loading a design
5.5.19 Printing ViewPoint
tm
5.5.20 Exiting the programme
5.5.21 ViewPoint
tm
support
ViewPoint
tm
(Version 3.03)
5.5.1 Introduction
ViewPoint
tm
software will automatically calculate the splay angles of a W8L Series
array and will indicate the optimum controller (processor) preset and amplifier patch
information once venue and array data has been entered. You can print out array,
venue, rigging and patch information and save your work to disk.
Please Note:
ViewPoint
tm
produces sonically accurate results based on high resolution
loudspeaker data and the audience coverage but you must use the amplifier
patch and one of the controller preset indicated for accurate Band Zoning and
smooth coverage.
1) The controller preset names shown on ViewPoint
tm
correspond to the
preset names on our DX1, XTA DP226 or XTA AudioCore data files.
2) Please ensure that your controllers are running our standard reference
presets for the W8L Series loudspeaker in use.
3) Users should start with a unity gain, zero delay, flat frequency response
controller input section and revert back to our standard presets at the
beginning of each venue setup to avoid using settings contaminated with
room equalization from a previous gig.
5.5.2 Installing ViewPoint
tm
ViewPoint
tm
is supplied in a zip folder which contains a setup executable file
ViewPoint 3.03.exe.
Double-click on this and follow the on-screen prompts.
All material © 2007. Martin Audio Ltd. Subject to change without notice.

Martin Audio WAVEFRONT COMPACT - APPLICATIONS GUIDE Specifications

General

Brand	Martin Audio
Model	WAVEFRONT COMPACT - APPLICATIONS GUIDE
Category	Speaker System
Language	English