Recommended W8C pairs:
Inner Farfield Outer Farfield
Inner Midfield Outer Midfield
Inner Nearfield Outer Nearfield
Inner Downfield Outer Downfill
Controller channel allocations
The whole cluster may be controlled from just ½ a Martin Audio DX1 controller set
up for 3-way operation. See Section 1.5 for further DX1 information.
Power amplifier channel allocations
There are 8 pairs of W8Cs each requiring high, high-mid & low-mid power amplifier
channels.
8 pairs at 3 bands per pair = 24 amplifier channels required
= 12 x 2ch amplifiers per cluster.
2ch power amplifier allocations:
Farfield inner & outer high Farfield inner & outer himid Farfield inner & outer lomid
Midfield inner & outer high Midfield inner & outer himid Midfield inner & outer lomid
Nearfield inner & outer high Nearfield inner & outer himid Nearfield inner & outer lomid
Downfill inner & outer high Downfill inner & outer himid Downfill inner & outer lomid
All material © 2007. Martin Audio Ltd. Subject to change without notice.
To Next Page
Loading...
