Martin MAC Encore Performance CLD User Manual

Service and display messages 33
COLD
FIXTURE COLD
Fixture too cold. Physical movement of effects is disabled until fixture has warmed up.
CTER
CTC ERROR
CTC flags position error.
CYER
CYAN ERROR
Cyan flags position error.
DCTC
DC TEMP CUT OFF
DC PCB temperature cutoff.
DCTE
DC TEMP SEN ERR
DC PCB temperature sensor error.
EFTC
EFF TEMP CUT OFF
Effects module temperature cutoff activated.
EFTE
EFF TEMP SEN ERR
Effects module temperature sensor error.
FAN HEAD FAN 1 ERR
FAN HEAD FAN 2 ERR
FAN HEAD FAN 3 ERR
FAN HEAD FAN 4 ERR
FAN BASE 1 FAN ERR
FAN BASE 2 FAN ERR
FAN BASE 3 FAN ERR
FAN HEAD FAN 5 ERR
FAN HEAD FAN 6 ERR
FAN HEAD FAN 7 ERR
FAN HEAD FAN 8 ERR
FAN HEAD FAN 9 ERR
FAN HEAD FAN 10 ERR
FAN HEAD FAN 11 ERR
FBEP
PA N F B AC K ER R
Pan position magnetic indexing system timeout. Fixture is unable to correct pan position (but
pan movement will often still be possible).
FBET
TILT FBACK ERR
Tilt position magnetic indexing system timeout. Fixture is unable to correct tilt position (but tilt
movement will often still be possible).
FOER
FOCUS ERROR
Focus position error. Fixture is unable to control focus.
FRTC
FR TEMP CUT OFF
Framing module temperature cutoff activated.
FRTE
FR TEMP SEN ERR
Framing module temperature sensor error.
FSER
FRAMING1 INS ERR
Framing blade 1 insertion position error.
FSER
FRAMING1 ANG ERR
Framing blade 1 angle position error.
FSER
FRAMING2 INS ERR
Framing blade 2 insertion position error.
FSER
FRAMING2 ANG ERR
Framing blade 2 angle position error.
FSER
FRAMING3 INS ERR
Framing blade 3 insertion position error.
FSER
FRAMING3 ANG ERR
Framing blade 3 angle position error.
Short code
Long message and explanation
Table 5: Error messages

Martin MAC Encore Performance CLD Specifications

General

Brand	Martin
Model	MAC Encore Performance CLD
Category	DJ Equipment
Language	English