Need help?Do you have a question about the Martin RoboScan 812 and is the answer not in the manual?
General| Brand | Martin |
|---|---|
| Model | RoboScan 812 |
| Category | Lighting Equipment |
| Language | English |
Essential safety guidelines for operating the RoboScan 812, covering electrical, environmental, and operational aspects.
Instructions for unpacking the RoboScan 812 and identifying included accessories.
Steps for safely connecting the power cord, including proper grounding and plug installation.
Guidance on verifying and setting the fixture's voltage and frequency to match the AC power supply.
Procedure to unlock the pan/tilt assembly for operation by removing securing straps and thumbscrew.
Instructions for installing the mounting bracket for suspension or floor standing, including safety checks.
Steps for connecting the RoboScan 812 to controllers using DMX or Martin protocols via serial link.
Instructions for setting the fixture's address using DIP-switches for controller communication.
Details on operating the RoboScan 812 independently using preprogrammed sequences triggered by sound or speed.
Guide for integrating and operating the RoboScan 812 with external DMX or Martin protocol controllers.
Information on controlling the fixture's lamp, including cold-restrike requirements and controller commands.
Explanation of pan and tilt control capabilities and speed adjustments via controller.
Details on the color wheel, its 13 positions, split color effects, and color strobe functionality.
Information on the gobo wheel, its 11 positions, and gobo strobe effects.
How to activate and utilize the fixture's preprogrammed random sequences.
Instructions for manually adjusting the focus of the beam using the threaded lens barrel.
Detailed steps for safely removing and installing a new lamp in the RoboScan 812.
Procedure for adjusting the lamp position to optimize beam centering and light distribution.
Guide to switching between 7-channel vector mode and 5-channel tracking mode for DMX control.
Detailed instructions for configuring voltage and frequency settings specific to RoboScan 812 US and EU models.
Instructions on safely locating and replacing the main fuse in the RoboScan 812.
Explanation of DMX 512 channels, values, and effects for RoboScan 812 operation.
Overview of dimensions, electrical specs, compatible lamps, and photometric data for the RoboScan 812.
A comprehensive reference table for DIP-switch configurations to control various fixture functions.
To Next Page