To Next PageTo Next Page
Need help?Do you have a question about the Marunaka V241LPS and is the answer not in the manual?
General| Brand | Marunaka |
|---|---|
| Model | V241LPS |
| Category | Brush Cutter |
| Language | English |
Ensure all operators read and understand the manual before use. Do not allow children.
Wear close-fitting protective clothing, safety shoes, gloves, face shield/goggles, and ear protection.
Be aware of vibration effects like Whitefinger disease. Hold firmly with both hands and maintain a firm foothold.
Switch off engine before carrying. Secure in vehicle. Empty fuel tank before transport. Start on flat surface with firm footing.
Familiarize with controls and check machine for loose parts or leaks before operation.
Clear work area of debris. Adjust harness for balance and ensure pole barrier is correctly assembled.
Use a sharpened blade. Worn teeth can cause sudden thrust and loss of control. Replace damaged blades.
Do not smoke when refuelling. Refuel in open spaces. Store fuel in approved container away from flames/sparks.
Attach engine to shaft housing securely. Do not run engine without shaft housing as clutch may fly off.
Press safety lever, hold throttle, push start knob. Start engine per manual. Release throttle lever to idle.
Push the stop knob to stop the engine. Be aware rotating parts may continue to spin briefly.
Press and hold levers, release while keeping knob pressed. Start engine and release throttle lever to idle.
Press the stop button to stop the engine. Be aware rotating parts may continue to spin briefly.
In an emergency, pull the red belt to separate the machine from the harness. Be cautious not to operate carelessly.
