– 4 –
[3] SAFETY USAGE
This product must be held to the right of the operator’s
body. This will exhaust fumes are directed away from the
operator and will not be obstructed by the operator’s
clothing. If you have not used a brush cutter before, spend
some time in becoming familiar with the controls and
method of usage before operation. Check the machine
carefully before using it. Make sure that there are no
loosened screws, damaged parts or fuel leakages. Replace
damaged or excessively worn accessories (blades, string
heads, GUARDS).
Ensure all maintenance and repair work are carried out by
an authorized service center. Check the condition of the
antivibration components on a regular basis.
N.B. In order to maintain performance and safety, be sure
to use original spare parts and accessories.
Avoid using the brush cutter over excessively long periods
of time.
Excessive amounts of vibration can be harmful.
1. Remove from the work area grit debris ropes, metal
parts or any other object which might get entangled
along the rotating parts or be dangerously projected.
Before starting to work, fir the harness correctly.
Adjust harness with the buckle so that the brush cutter is
well blanced on your right side and the blade or string
head is parallel to the ground.
Ensure the pole barrier is correctly assembled (on units
supplied with one).
Fig. 3-1
To Next Page
Loading...