- 14 -
[12] FAULT FINDING TABLE
Engine will
not start.
Engine will not
Start of run
badly.
The brush
cutter does
not cut well.
Engine runs fast
but loses power
when cutting.
Check STOP switch is in
the position I.
● ●
Control fuel level min.
25% tank capacity.
● ●
Check air filter is clean.
●
Remove spark plug, dry it,
clean it and adjust it, and
replace it, if necessary.
● ●
Control and adjust the
carburetor screws if
necessary.
● ● ●
Change fuel filter.
Contact your dealer.
●
Carefully follow the blade
assembly instructions.
●
Check blade is sharp.
Otherwise, contact you
dealer.
●
To Previous Page
Loading...
