[12] FAULT FINDING TABLE
– 13 –
Engine
will not
start.
Engine
will not
start of
run
badly.
The
brush
cutter
does
not cut
well.
Engine
runs
fast but
loses
power
when
cutting.
Check STOP switch is in
the position I.
●●
●●
●
● ●
●●●
●
●
●
Control fuel level min.
25% tank capacity.
Check air filter is clean.
Remove spark plug, dry it,
clean it and adjust it, and
replace it, if necessary..
Control and adjust the
carburetor screws if
necessary.
Change fuel filter.
Contact your dealer.
Carefully follow the blade
assembly instructions.
Check blade is sharp.
Otherwise, contact you
dealer.
To Next Page
Loading...
