EasyManua.ls Logo

Maruyama BCV5020 - Brushcutter Blade Cutting Direction; Avoiding Kick-back

Maruyama BCV5020
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
GB-17
5
-
10cm above
Ground
Scaling
To remove unwanted vegetation, hold the trimmer head
5-10cm above the ground and at an angle. Allow the
tip of the line to strike the ground cutting the vegetation
off at the surface.
Mowing
Keep the line parallel to the ground and use a gentle
side-to-side motion.
Cutting Direction of Brushcutter Blade
When cutting heavy brush, always swing the Brushcutter from right to left. Swinging the Brushcutter from left to right
can cause the blade to kick back.
WARNING
POTENTIAL HAZARD
Cutting heavy brush from the wrong direction can cause the Brushcutter blade to kick back.
WHAT CAN HAPPEN
Contact with the Brushcutter blade can cause severe personal injury.
HOW TO AVOID THE HAZARD
Always swing the Brushcutter from right to left when cutting heavy brush as shown.
CORREC
T
Direction of Swing
No Kic
k
-
back Zone
INCORREC
T
Direction of Swing
DANGE
R
Kic
k
-
back Zone

Table of Contents

Related product manuals