MZ034
English
121
1 Introduction .................................... 122
1.1 Conventions .................................. 122
1.1.1 Orientation of the Fork .............. 122
2 Technical information .................... 123
2.1 Spring System ............................... 123
2.2 Damping System ........................... 124
2.3 Lubrication and Cooling ................. 126
2.4 Sliding Bushing and Oil Seals ....... 126
3 Installation ...................................... 127
3.1 Installing on the Frame .................. 127
3.2 Installing the Brake System ........... 128
3.3 Wheel Installation .......................... 129
3.4 Wheel Axle Securing System ........ 129
3.4.1 Wheel Installation On A
Standard Fork ........................... 129
3.4.2 Wheel Installation On ø 32 mm
Forks With A ø 20 mm
Through-Hole Axle ................... 130
3.4.3 Wheel Installation On 66
And 888 Series Forks ............... 131
3.4.4 Wheel Installation On
Monster Series Forks ............... 132
3.5 Fender Installation ......................... 133
3.6 Handlebar Clamp Installation ........ 133
3.6.1 Handlebar Clamp Installing
On All Dual Crown Models
(except the 888 Series) ............ 133
3.6.2 Handlebar Clamp Installation
For The 888 Series ................... 134
4 Maintenance ................................... 135
4.1 Problems - Diagnosis - Solutions .. 135
4.2 Periodic Maintenance .................... 136
4.3 General Maintenance
Recommendations ........................ 137
4.4 Cleaning The Fork Legs ................ 138
4.5 Monster Air-Bleeding .................... 138
5 Adjustments ................................... 139
5.1 Adjustment Kit And Springs ........... 139
5.2 Spring Preload ............................... 139
5.3 Positive Air .................................... 139
5.4 SAG ...............................................140
5.5 Negative Air ...................................141
5.6 PAR - Air Progression
At Travel End .................................141
5.7 Rebound Adjustment .....................141
5.8 Compression Adjustment ...............141
5.9 ETA (Extension Travel Adjustment) 141
5.10 TAS (Travel Adjustment System) ...142
5.11 TST (Terrain Selection Technology) 142
5.12 TST cartridge with remote control ..142
5.13 RC2 ................................................143
5.14 RC2X .............................................143
6 Summarizing tables ........................146
7 Warranty ..........................................167
7.1 Warranty for EU
countries ........................................167
7.2 Warranty rest of the world
– USA included ..............................168
To Next Page
Loading...
