Masibus masTER T-Sync MTS200 - Page 152

Model: MTS200 (1U)
Doc. Ref. no. : m08/om/201
Issue no. : 03
User’s Manual Page 152 of 195 Page 152 of 195
iso.3.6.1.4.1.38306.2.1.0 = STRING: "16:58:19"
iso.3.6.1.4.1.38306.2.2.0 = STRING: "19/09/15"
iso.3.6.1.4.1.38306.2.3.0 = STRING: "GPS lock"
iso.3.6.1.4.1.38306.2.4.0 = STRING: "2314.9194 N"
iso.3.6.1.4.1.38306.2.5.0 = STRING: "07237.8437 E"
iso.3.6.1.4.1.38306.2.6.0 = INTEGER: 11
iso.3.6.1.4.1.38306.2.7.0 = STRING: "Sync."
iso.3.6.1.4.1.38306.2.8.0 = STRING: "0.000"
iso.3.6.1.4.1.38306.2.9.0 = STRING: "0 days,1:43"
.
.
.
.
.
.
iso.3.6.1.4.1.38306.6.11.0 = STRING: "DES"
iso.3.6.1.4.1.38306.6.12.0 = STRING: "passphrase1"
iso.3.6.1.4.1.38306.6.13.0 = STRING: "192.168.100.231"
iso.3.6.1.4.1.38306.6.14.0 = INTEGER: 3
iso.3.6.1.4.1.38306.6.15.0 = STRING: "allreadwrite"
iso.3.6.1.4.1.38306.6.16.0 = STRING: "rw"
iso.3.6.1.4.1.38306.6.17.0 = INTEGER: 1
iso.3.6.1.4.1.38306.6.18.0 = STRING: "trapcommunity2"
iso.3.6.1.4.1.38306.6.19.0 = STRING: "usernamesnmpv33333"
iso.3.6.1.4.1.38306.6.20.0 = STRING: "0x123456789123456789"
iso.3.6.1.4.1.38306.6.21.0 = STRING: "MD5"
iso.3.6.1.4.1.38306.6.22.0 = STRING: "passphrase222"
iso.3.6.1.4.1.38306.6.23.0 = STRING: "DES"
iso.3.6.1.4.1.38306.6.24.0 = STRING: "passphrase222"
iso.3.6.1.4.1.38306.6.25.0 = STRING: "masibus"
iso.3.6.1.4.1.38306.6.26.0 = STRING: "Sector"
iso.3.6.1.4.1.38306.6.27.0 = INTEGER: 0
masTER T-Sync device can be configured by multiple modes such as front panel keypad, SSH, Telnet,
HTTP/HTTPS and SNMP Managers. This device provides the flexibility to configure both SNMP
managers in read-only mode or read-write mode or read/read-write access with public community. Public
community makes it possible for multiple SNMP managers to configure masTER T-Sync. SNMP
managers need to copy masTER T-Sync customized MIB in their respective mib folder before running any
snmp operation on this agent device.
SNMP variables in masTER T-Sync can be configured using respective variable OID address using
snmpset command from unix/linux based systems. Also, some graphical based SNMP manager software
such as MIB Browser allows menu based options for configuring SNMP agent variables. Refer below
examples for configuring using snmpset command.
FOR SNMP v1:
To set single integer variable with IPv4:
user@ubuntu:~$ snmpset -v 1 -c comm_name 192.168.100.121 .1.3.6.1.4.1.38306.3.1.0 i 1
To set single integer variable with IPv6 Link-local:
user@ubuntu:~$ snmpset -v 1 -c comm_name udp6:[fe80::1eba:8cff:fee5:bb52] .1.3.6.1.4.1.38306.3.1.0 i
1