Masibus masTER T-Sync MTS200 - Page 77

Model: MTS200 (1U)
Doc. Ref. no. : - m08/om/201
Issue no.: 03
Page 77 of 195 User’s Manual
“0” is special case to disable
SNMP agent configuration for
SNMP Manager1.
Default: 0
3
v1 &
v2c
RO Community String
(v1 / v2c)
public
SNMP ro community name
for Manager 1
Note:
 Min – 4 chars, Max – 30
chars.
 No special characters
allowed
Default: public
4
v1 &
v2c
RW Community String
(v1 / v2c)
public
SNMP rw community name
for Manager 1
Note:
 Min – 4 chars, Max – 30
chars.
 No special characters
allowed
Default: public
5
v1, v2c ,
v3
Manager1 Permission
ro / rw
Read only or Read-write
permission to SNMP
Manager1 in MTS200.
Default: ro
6
v1, v2c ,
v3
Manager1 Trapenable
0 / 1
SNMP trap status for
Manager1.
Default: 0
7
v1 &
v2c
Manager1
Trapcommunity(v1/v2c)
public
Community string for
SNMPv1/v2 if trap is
enabled.
Note:
 Min – 4 chars, Max – 30
chars.
 No special characters
allowed
Default: public
8
v3
Manager1 v3
username
User defined
string
SNMP v3 USM security
name
Note:
 Min – 4 chars, Max – 30
chars.
 No special characters
allowed
Default: username
9
v3
Manager1 EngineId
(v3)
User defined
value
SNMP v3 Manager engine
ID.
Note:
 Min – 4 chars, Max – 40
chars.
 No special characters
allowed
 Must begin with 0x format
Default: