8
CAUTION: When using Masimo Stork, locate the devices away from sources that may interfere with the
Bluetooth connection. The presence of other devices that may create radio frequency interference (RFI)
may result in loss of Quality of Service of the Bluetooth connection (see Specifications for details).
Devices that may cause RFI include but are not limited to the following: cell phones, laptops and tablets,
pagers, Bluetooth devices, devices with remote controls, electrocautery equipment, diathermy equipment,
and baby monitors.
CAUTION: To ensure security and prevent tampering of your smart phone, while using the Masimo
SafetyNet Alert:
• Smart device should be located with responsible users.
• Smart device should not be left unattended.
• Security features on smart device should be activated.
• Unauthorized changes should not be made to the Masimo Stork system.
CAUTION: Check your setup by viewing the display on the App and the Masimo Stork Hub. The App and
Masimo Stork Hub will provide an indication if there is a problem with the internet connection.
CAUTION: Check your system setup by viewing the display on the smartphone Masimo Stork
Application. The Masimo Stork App will provide an indication if there is a problem with the internet
connection.
CAUTION: Avoid placing Masimo Stork near other wireless devices to prevent loss of performance.
Masimo Sensor
ALL TBD
WARNING: Properly apply the Masimo sensor according to sensor's Directions for Use. Applying the
sensor incorrectly could result in incorrect or no readings.
CAUTION: Avoid using Masimo Sensor under bright light sources and direct sunlight to maintain the
performance of the device.
CAUTION: To maintain Bluetooth connectivity with the Masimo Sensor, ensure that the Masimo Stork
Hub is within the specified distance and in line-of-sight of the Masimo Sensor. See Specifications on
page 43.
Cleaning and Service Warnings
ALL TBD
WARNING: Do not attempt to remanufacture, recondition or recycle the Masimo sensor, Masimo chip or
Masimo Stork Hub to prevent harm or damage to the system.