17
Basic Setup and Use
Getting Started
The Masimo Stork system can be ready to use in the following steps:
1. Setup the Smart Phone - Prepare the smart phone for use with the Masimo Stork App.
• Download the Masimo Stork App on your smart phone and complete the registration
and login process.
2. Setup the Masimo Stork System – Use the Masimo Stork App and complete the following:
• Create a profile for the baby (or babies) to be monitored.
• Connect the Masimo Stork Hub to the App using local Wi-Fi.
• Connect the Masimo Sensor with the Masimo Stork Hub.
• Attach the Masimo Stork Boot to the baby.
3. View Live Data – After the Boot with Sensor is attached to the baby, open the Masimo Stork
App to start monitoring and view live data on the Vitals Dashboard.
Step 1: Smart Phone Setup
Prepare the Smart Phone for Use:
A compatible smart phone is required to install and operate the Masimo Stork App.
To use your smart phone with the Masimo Stork App check the following:
• Compatibility
Note: For a list of smart phones and operating systems that work with the Masimo Stork
App, check TBD WWW.??? before upgrading the smart phone or its operating system.
• Smart Phone Battery is charged
• Bluetooth is ON
• Wi-Fi is ON and the smart phone in connected to the internet
• Time is set to the Current Local Time
Download and install the Masimo Stork App on the smart phone:
To Next Page
Loading...