Masimo Stork - Step 2: Masimo Stork System Setup; Create a Baby Profile

18
Download and install the Masimo Stork App. Follow the on-screen instructions to install.
For more on how to install an app, see the smart phone's manual.
NEED NEW
TBD
Note: If the Masimo Stork App requests for the smart phone to share its location, select OK or Allow.
The smart phone location is required for Bluetooth connection.
Create a User Account:
After installation, open the Masimo Stork App and select Create Account. Follow the on-screen
instructions to create a new user account.
• If you have an existing user account, simply log in using the account credentials.
Step 2: Masimo Stork System Setup
After the Masimo Stork App is installed and user account created, follow the on-screen instructions to set
up your Masimo Stork System:
• Set up a Baby Profile for the baby (or babies) to be monitored.
• Connect the Masimo Stork App to the Masimo Stork Hub and local Wi-Fi network.
• Charge the Masimo Sensor and connect the Sensor to the Masimo Stork Hub.
• Attach the Sensor to the Masimo Stork Boot and attach the Boot to the baby for monitoring.
Create a Baby Profile
After creating an account, login to the Masimo Stork App and follow the on-screen instructions to and set
up a Baby Profile.
1. Enter the requested information about the baby when prompted and select Continue, or
select Skip to not enter that information.
Note: Multiple profiles can be created to monitor different babies.
2. When the Baby Profile is complete, select Set Up HUB to continue.