Mastech MS8264 User Manual

( , k ( , M (
( :
k ( :
M
( :
Ohm. The unit of resistance.
Kilohm. 1x103 or 1000 ohms.
Megohm. 1x106 or 1,000,000
ohms.
kHz
K
H
z:
Kilohertz. 1x103 or 1000 hertz.
( F, nF
F:
( F
:
n
F:
Farad. The unit of capacitance.
Microfarad.1x10-6 or 0.000001
farads.
Nanofarad. 1x10-9 or
0.000000001 farads.
2.3 Keypad
See Table 2 indicated for information about the keypad operations.
Table 2. Keypad
Key Function Operation performed
ON/O
FF
Any switch
position
turn the meter on or
off
HOLD Any switch
position
Press HOLD to enter
and exit the Data
Hold mode.
LIGH
T
Any switch
position
Press LIGHT to turn
the backlight on.
After about 5
seconds, the
backlight is auto-off.
2.4 Terminals
See Table 4 indicated for information about the terminals.
Table 4. Terminals
Termi
nal
Description
COM
Return terminal for all measurements.
（ Receiving the black test lead or the
“ com ” plug of the special multi-function
socket ）
V (
Hz
Input for voltage, resistance, frequency,
diode and continuity measurements.
(Receiving the red test lead)
℃ mA
hF
E
Input for capacitance, Temperature,
hFE and 0.001mA to 200mA current
measurements. （ Receiving the red
test lead or the “ + ” plug of the special

Mastech MS8264 Specifications

General

Brand	Mastech
Model	MS8264
Category	Multimeter
Language	English