Master Forge CBS1301L - Assembly Instructions; Temperature Gauge (C). Attach Temperature Gauge

8
Lowes.com/masterforge
3. Attach door (H) to upper smoker body (G) using
two M4 x 15 mm screws (AA) and two M4 wing nuts
(CC).
Hardware Used
AA
M4 x 15 mm Screw x 2
CC
M4 Wing Nut x 2
ASSEMBLY INSTRUCTIONS
1. Remove pre-assembled wing nut and washer from
temperature gauge (C). Attach temperature gauge
(C) to lid (B) using the pre-assembled washer and
wing nut.
Attach handle (A) to lid (B) using two M5 x 12
screws (BB) and two M5 wing nuts (DD).
Hardware Used
BB
M5 x 12 mm Screw x 2
DD
M5 Wing Nut x 2
1
2. Attach handles (A) to upper smoker body (G) using
four M5 x 12 mm screws (BB) and four M5 wing
nuts (DD).
Hardware Used
BB
M5 x 12 mm Screw x 4
DD
M5 Wing Nut x 4
2
3