4
HARDWARE CONTENTS
ASSEMBLY INSTRUCTIONS
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
Tools required for assembly (not included):
PHILLIPS SCREWDRIVER
2. Remove all packing materials from heater.
CAUTION: “RISK OF BURNS”
DO NOT OPERATE HEATER WITHOUT
INSTALLING THE PROTECTIVE GUARD OR GRILL.
1. Remove the heater and all packing materials from
the box.
NOTE : Save the shipping carton and packing
materials for future storage.
Carrying handle
Qty. 1
Rear guard
Qty. 1
Top guard
Qty. 1
Batteries
Qty. 2
Top Plate
Qty. 1
Front guard
Qty. 1
Siphon pump
Qty. 1
Screws
Qty. 2
AA FF GG
HH
BB CC DD EE
1
2
A
To Next Page
Loading...