Master MH-80T-KFA - Whats in the Box

NEVER LEAVE HEATER UNATTENDED WHILE BURNING OR
WHILE CONNECTED TO A POWER SOURCE
© 2018 Pinnacle Climate Technologies, Inc. Kerosene Forced Air Heater User’s Manual
4
WHAT’S IN THE BOX 45KFA / 80TKFA
- Remove the heater and all packaging materials
from the shipping carton
Note: Save the box and packaging materials
for future storage.
Shown With Optional Cord
Wraps
Cord Wraps (Optional) Carry Handle (1)
10 mm Screws (2) 15 mm Screws (2)
WHAT’S IN THE BOX 140TKFA / 190TKFA / 215TKFA
Tools Needed:
- Phillips Head Screw Driver
- 8 mm open end wrench
- 19 mm open end wrench
Tip: Be sure to remove the axle from the side of the
Styrofoam packaging.
Tip: Use a power screwdriver and locking wrench
for easier assembly.
Front Handle
Axle
Rear Handle
Wheel Support Frame
50 mm Screws (4) 30 mm Screws (4) 8 mm Nuts (8) Wheels (2)
Axle Nuts (2) Spacers (2)
Heater (1)
Heater (1)