MasterCraft 052-1899-2 - Diode and Continuity Tests

OPERATING INSTRUCTIONS
Relative mode is available in all functions except frequency and duty
cycle functions.
Selecting relative mode causes the meter to store the present
reading as a reference for subsequent measurements.
Using Relative Mode
DIODE AND CONTINUITY
RANGE INTRODUCTION TEST CONDITION
The approx. forward
voltage drop of the
diode will be displayed.
Open Circuit Voltage:
about 1.5 V
Overload Protection:
300 V DC/AC
The built-in buzzer will
sound if the resistance
is less than about 50 Ω.
The buzzer will not
sound if the resistance
is more than 120 Ω.
Open Circuit Voltage:
about 0.45 V
Overload Protection:
300 V DC/AC
model no. 052-1899-2 | contact us 1-800-689-9928
19
TECHNICAL SPECIFICATIONS