●
●
●
Do not use the meter in a manner not specified by this manual
or the safety features of the meter may be impaired.
Remaining endangerment:
When an input terminal is connected to dangerous live potential
it is to be noted that this potential at all other terminals can
occur!
CAT III
4
WARNING
– Measurement Category III is for measurements
performed in the building installation. Examples are
measurements on distribution boards, circuit breakers,
wiring, including cables,bus-bars, junction boxes, switches,
socket-outlets in the fixed installation, and equipment for
industrial use and some other equipment, for example,
stationary motors with permanent connection to the fixed
installation.
Do not use the meter for measurements within
Measurement Categories IV.
To Next Page
Loading...
Need help?
General
