UNPACKING
1. Carefully remove the table saw from the carton.
2. Separate the parts.
3. Lay out all the parts and check them against the parts listed below.
Examine all parts carefully.
WARNING: IF ANY PART IS MISSING OR DAMAGED, DO NOT PLUG IN THE
TABLE SAW UNTIL YOU HAVE REPLACED THE MISSING OR DAMAGED PARTS.
CALL THE TOLL FREE HELPLINE AT 1-866-881-7202 FOR MORE INFORMATION.
Table saw assembly
¢p-'7
Blade guard and
splitter with laser
®®
Roller wheels
Nuts
Square neck
mounting bolts
Blade guard
mounting bolt,
whashers and
mounting screw
P
screw
Leveling pad
Blade
wrenches
qq
Hex key
Blade
Miter gauge
Table extension
fence
Blade elevation
handwheel
Dust bag
Lock handles
0 Nut
Batteries
Washer
Rip fence
To Next Page
Loading...
