11
CHAPTER Ⅳ SERVICE AND MAINTENANCE
4.1 Service
4.1.1 FLUIDS AND LUBRICANTS
1. Grease:
Use multi-purpose lithium based grease.
2. Gear Box Oil:
Use N46 drive &hydraulic dual-purpose oil or equivalent for all operating conditions.
Each Gearbox Capacity: 0.85 liter
3. Storing Lubricants:
Your machine can operate at top efficiency only if clean lubricants are used. Use clean
containers to handle all lubricants. Store them in an area protected from dust, moisture
and other contaminants.
4.1.2 GREASING
z Use a hand-held grease gun for all greasing.
z Wipe grease nipple with a clean cloth before greasing, to avoid injecting dirt and grit.
z Replace and repair broken nipple immediately.
z If nipples will not take grease, remove and clean thoroughly. Also clean lubricant
passageway. Replace nipple if necessary.
To Next Page
Loading...