12
4.2 Maintenance
ATTENTION: All maintenance, repairing, cleaning and lubricating
shall be conducted when the tractor and motor are
stopped and the key is taken away.
By following a careful service and maintenance program for your machine, you will enjoy
many years of trouble-free operation.
The period recommended is based on normal operating conditions. Severe or unusual
conditions may require more frequent maintenance.
4.2.1 8 HOURS OR DAILY MAINTENANCE
z Check and screw all nuts and bolts in connection parts.
z Check the blade and fixing parts every day and replace the damaged parts if they are
found damaged. Don’t install damaged, worn and unbalanced blade. New sleeve shall
be used to replace the worn fixing parts on the blade.
NOTE:
The operator shall put on gloves and use suitable tools before changing blade.
z Check the oil in gearbox. Fill them up to line if it’s necessary.
z Press butter in each oil nipple three to five times.
z Clean the implement; take away all grass and mud.
IMPORTANT: Check the oil level only when the unit is cold and
the machine is on the level.
4.2.2 SEASON MAINTENANCE
z Check the machine as below beside the terms of daily maintenance.
z Check the oil in gearbox; replace it if it is bad.
z Check the bearings of blade spindles whether mud and water have been enter because
oil seals are damaged, if it’s so, disassemble and clean them and replace them if it is
necessary. And then press butter into them.
z Check the distance between bearings and gears. Adjust them if it’s necessary.
To Next Page
Loading...