57
10.3 TV PROGRAMMING INSTRUCTIONS
CHAPTER 10: CONSOLE SPECIFICATIONS AND ASSEMBLY GUIDE
Once the cardio equipment has been installed and proper power and cable wiring is provided, the Television must be programmed to the club's
channels and settings.
1.
Enter Update manager by pressing ENTER, 3, 0, 0, 1, ENTER on the lower keypad. Then select TV, Source Selection "Coaxial", then press
the Next button to "TV Channel Setup" (Figure A).
2.
Set the Source Selection, Country, and Program List, then press “Start Scan” to begin scanning (Figure B).
3. Scan Started will be displayed on the screen (Figure C).
FIGURE BFIGURE A
FIGURE C
To Next Page
Loading...
