Matrix 7xe User Manual

59
11.2 SOFTWARE UPGRADE PROCEDURE FROM WEBSITE
CHAPTER 11: SOFTWARE UPGRADE PROCEDURE
FIGURE A FIGURE B
NOTE: Don't power off the machine while the software is being installed. After the software has been installed completely, turn off the
machine and wait 30 seconds, then turn the machine back on. If the display shows 04A
0, turn off & turn on the machine again.
1)
Enter Update manager by pressing ENTER, 3, 0, 0, 1, ENTER on the lower keypad. Then select Update and update source "Check for
Update" (Figure A).
2)
Press "Install" to auto-run the upgrade process (Figure B).

Matrix 7xe Specifications

General

Brand	Matrix
Model	7xe
Category	Music Mixer
Language	English