What should I do if my Matrix C3X-02 shows a DC brake error (ERROR CODE 02BE)?
If you encounter a DC brake error (ERROR CODE 02BE), first check the power extend wire connection between the brake and LCB for any damage. Then, check to see if the stairs will move when you are in the stop position. If yes, replace the brake.
What steps should I take if my Matrix C3X-02 displays error code 02C7 (Frame IR receiver disconnection)?
If your Matrix Fitness Equipment displays error code 02C7 (Frame IR receiver disconnection), begin by checking the connection of the frame IR receiver cable from the LCB to the frame IR receiver sensor. Then, check if LED1 on the small transfer board is bright. If it is not, replace the LCB set (part no.1000336916). If LED1 is bright, replace the frame IR receiver cable.
General| Brand | Matrix |
|---|---|
| Model | C3X-02 |
| Category | Fitness Equipment |
| Language | English |
Locates the serial number on the main unit frame.
Essential safety guidelines for operating and maintaining the equipment.
Specifies electrical standards and dedicated circuit needs for safe operation.
Guidelines for locating the unit to ensure safety and proper functioning.
Explanation of LED indicators on the Lower Control Board and their meanings.
Steps for diagnosing and resolving specific error codes encountered on the unit.
Guidance for resolving issues like no power, heart rate problems, or toggle malfunctions.
Guidelines for testing the machine after parts have been replaced.
To Next Page
