Documentation Disclaimer
Matrix Comsec reserves the right to make changes in the design or components of
the product as engineering and manufacturing may warrant. Specifications are
subject to change without notice.
This is a general documentation for all models of the product. The product may not
support all the features and facilities described in the documentation.
Information in this documentation may change from time to time. Matrix Comsec
reserves the right to revise information in this publication for any reason without
prior notice. Matrix Comsec makes no warranties with respect to this documentation
and disclaims any implied warranties. While every precaution has been taken in the
preparation of this quick start, Matrix Comsec assumes no responsibility for errors
or omissions. Neither is any liability assumed for damages resulting from the use of
the information contained herein.
Neither Matrix Comsec nor its affiliates shall be liable to the purchaser of this
product or third parties for damages, losses, costs or expenses incurred by the
purchaser or third parties as a result of: accident, misuse or abuse of this product or
unauthorized modifications, repairs or alterations to this product or failure to strictly
comply with Matrix Comsec's operating and maintenance instructions.
Copyright
All rights reserved. No part of this quick start may be copied or reproduced in any
form or by any means without the prior written consent of Matrix Comsec.
Version 10
Release date: June 18, 2011
To Next Page
Loading...
