Matrix S-Drive - 5.4 RUNNING DECK REPLACEMENT

12
5.4 rUnninG Deck rePlacemenT
1)RemovethesiderailasoutlinedinSection5.2
2)Loosenbothrolleradjustmentscrews(FigureA).
3)Removethefourrunningdeckscrews(FigureB).
4)Removetherunningdeckfromtherunningbelt(FigureC).NOTE: Be careful not to pinch fingers during removal / installation of the running
deck.
5)TensiontherunningbeltasoutlinedinSection2.3.
fiGUre c
cHaPTer 5: ParTS rePlacemenT GUiDe
fiGUre a
fiGUre b