Matrix SATATYA Devices Manual 295
the system will send the name of the event in the subject line as well as the details of the event in the main
message. However, the user can also define the subject as well as the message to be sent in the email.
SMS Notification: This option requires a GSM modem to be connected to the serial port of the HVR and the
modem settings configured from the RS-232 option. On the occurrence of the event the system will send an SMS to
the specified cell phones. The cellphone numbers are specified in the Mobile No 1 and Mobile No 2 fields. Click on
the SMS Notification button to specify these parameters.
The Telecom Regulatory Authority of India (TRAI) have imposed SMS Scrubbing, that is every SMS
content needs to be verified before it is delivered to the users. Hence it is mandatory for all businesses
using SMS to register the SMS content template prior with their Service Provider. This is regulated to avoid
spam, fake and fraudulent communication through SMS.
Once registered, the Service Provider will provide a Template ID against the registered SMS content.
If you have selected SMS Lane as the Service Provider, make sure you enter the Template ID after the
message content. Format: &TemplateID=<value>
TCP Notification: This option enables the administrator to configure an action to send a message to the specified
tcp server as configured from the Network option as explained earlier. Click on the TCP Notification button and
specify the message to be sent to the tcp server if required. This is only required if the default message as
configured on the system is to be overridden.
To Next Page
Loading...
Need help?
General
