Matrix SATATYA NVR6404X System Manual

Matrix SATATYA Devices Manual 65
Installing Hard Disks
The Matrix SATATYA device can be fitted with various brands of commercially available SATA hard disks. The
number of hard disks that can be installed in SATATYA devices is shown below. Each hard disk can support upto
10TB (TeraBytes) of storage capacity.
NVRX Series Variants HDD support
Other NVR Variants HDD support
HVR Variants HDD support
You are recommended to install video surveillance SATA Hard disks of any standard brand.
CAUTION! Any electrostatic energy coming in contact with the hard disk or the internal parts of the NVR
can cause permanent damage to them. Before you begin the installation of the hard disk, make sure your
workstation is static-free. Always wear an electrostatic discharge preventive wrist strap or belt and use a
grounding mat.
Make sure power supply is disconnected. Unplug the power adapter, if you have connected it to SATATYA NVRX
Click on the following links to know the HDD installation of SATATYA NVR and HVR.
“Installing HDD in NVRX Variants”
“Installing HDD in other NVR Variants”
“Installing HDD in HVR Variants”
HDD
NVR0801X/
NVR1601X
NVR1602X/
NVR3202X
NVR3204X/
NVR6404X
NVR6408X
Max No. of HDD
supported
1248
HDD
NVR
8S
NVR16S
NVR
24P
NVR16H
NVR
64P/S
Max No. of HDD
supported
11244
HDD
HVR
1624P
HVR
1624S
HVR
0824P
HVR
0824S
HVR
0408P
HVR
0408S
Max No. of HDD
supported
414111

Matrix SATATYA NVR6404X Specifications

General

Brand	Matrix
Model	SATATYA NVR6404X
Category	DVR
Language	English