Step1: Opening Lens cover
Adjusting Camera Angle
Figure 10
• Use the Allen Key to loosen the Retainer screws on 3 sides of
camera body.
• The retainer screws will still remain loosely connected.
• Open the lens casing body.
• Now you can adjust the camera angle.
Retainer
screws
Alley Key
LED: CLASS1 (Category RS1)
Step2: PAN, TILT movement
Thumb screws
Figure 11
• Loosen thumb screws on both sides of lens for PAN movement, see
Figure 11.
• For PAN movement you can move the camera to 100 degrees on
one side, see Figure 12. To capture other side view, you have to
open the camera body from the mounting ring, turn the body and
mount to other side.
18
17
Never look at the transmit laser while the power is on. Never
look directly at the fiber ports and the fiber cable ends when
they are powered on.
Use of controls or adjustment to the performance or procedure
other than those specified herein may result in hazardous laser
emission.
To Next Page
Loading...